60W Gigabit Poe+ Injector 10/100/1000Mbps Poe Injector Ethernet Adapter

About this item

This 60W Gigabit PoE+ injector adds power and data to any non-PoE Gigabit Ethernet line, ideal for powering IP cameras, access points, and IP phones over a single cable. It auto-senses and supplies 15.4W, 30W, or up to 60W depending on the connected device, following the 802.3af/at/bt standards. With one Gigabit input and one PoE+ Gigabit output port, it keeps full duplex Gigabit speeds over distances up to 100 meters. Setup is plug-and-play, with the power supply built right into the unit.

• Turns any standard Gigabit Ethernet port into a PoE+ port, delivering both data and power over one cable
• Auto-sensing output up to 60W (802.3bt), with backward compatibility for 802.3at (30W) and 802.3af (15.4W) devices — passive PoE not supported
• Supports full duplex Gigabit speeds (10/100/1000Mbps) up to 100 meters (328 ft) from the injector
• One Gigabit input port and one PoE+ Gigabit output port, combined for up to 2Gbps full duplex throughput
• Built-in power supply with included grounded AC cord — no external adapter needed
• Plug-and-play setup, works with IP cameras, IP phones, wireless access points, and other 802.3af/at/bt PoE gear

Specifications

UPC

744759267009

Color

Gigabit Ultra PoE+, 65W

Number of Items

1

Number of Packs

1

Compatible Devices

Internet Protocol Camera

Data Link Protocol

IEEE 802.3

Data Transfer Rate

1 gigabits_per_second

Hardware Interface

Ethernet